Bi-Fold Door Repair
Bi-fold doors can be used to connect outdoor and indoor spaces. They offer an unobstructed view and provide easy access to your garden or patio.
Over time, they may cause issues that require bi-fold doors repair. Luckily these issues are usually easy and inexpensive to fix.
Misalignment
Over time bifold doors can be damaged or misaligned due to wear and tear. The doors may not be closing correctly, the track may be sagging or the hinges may be loosening.
This is a typical issue with bifold doors. The first thing you need to determine is if the tracks are in good condition and if there's debris that requires to be removed. The door guide might also require a reset within the head track. Close the closet door and ensure that the edge of the doors is parallel to the frame. After you have adjusted the track close and open the closet doors again to ensure that they function smoothly and are closed securely.
bi-fold door repair for this issue is that the pivot hinges aren't aligned with one another. When you attempt to open or close the doors they can get stuck. This could be a risky issue as it means people have to fight the door in order to open and close it, causing injury to themselves. To fix this, loosen screws on the top left and right hinge brackets. Then shift the pivot to a position that allows the door to close easily.
Over time composite front doors or uPVC doors can also collapse. This can lead to a range of consequences including the doors not being able to lock or shut, and can cause damage to other hardware, which can be expensive to replace.
If your bifold doors drop it's important to get an expert in for a quick and easy fix. A professional can pinpoint the root of the issue and resolve it, rather than replacing the part that's causing a visible issue. This will save you money and avoid future issues. A specialist will also be in a position to provide an accurate quote for the repair work and a timeline for when the work can be completed.
Hardware Issues
No matter if they're exterior or internal bifold doors are frequently get stuck when trying to open or close them. This could lead to them breaking down or wearing out, requiring a replacement. This issue is most likely due to the absence of regular maintenance or cleaning. To avoid this, ensure that you clean and lubricate your tracks. This will prevent them from becoming stuck or blocked.
If your doors are stuck when they close and open check that there's nothing blocking their track. Check that the hinges and the track are properly anchored and that there aren't any gaps or debris around the frame.
As with all doors, uPVC bifold doors can sometimes be difficult to open with time. This could be caused by various reasons, including dirt in the track and the door being too tight. It could also be due to a broken locking mechanism. Thankfully, most of these issues are preventable by performing regular maintenance.
One of the most frequent bifold door problems is the bottom hinges or rollers breaking. This is because these components are used frequently and are subjected to lots of pressure. If they're not taken care of correctly, they can break or even break off the track altogether.
This can be easily repaired with an adjustable wrench or a pair pliers. Simply turn the nuts around the pin. You can also take off the bracket and the door to make a shim that can raise or lower the door. This is a simple and affordable solution to this problem. It should only take a few seconds. In more serious cases, you'll need to replace the part entirely. However, this isn't typically required if it's only intermittently occurring. Having bifold doors that are difficult to open could be dangerous, so it is recommended to get the problem fixed quickly by an expert. ARTAN's experts are equipped with the knowledge and skills to take care of all your repairs to your bifold doors.
Cracked Corners
Bifold doors are supported by a slat, not like sliding closet doors that rest on tracks, using pins that are screwed into brackets and fixed to the side, floor or top jamb. The brackets can be adjusted to move the door panel from one side or the other. If the brackets are damaged or loose, they can cause the corner to break or bend. This can result in the doors not closing properly, or opening completely.
It is usually simple to diagnose and fix the issue. It is first necessary to identify the cause of the noise. If it's coming from the track, it could be something stuck or lodged and will require cleaning. If the rattling originates from the hinges or mechanism, it can usually be fixed by loosening the screws and moving the door back into position. Then, tighten the screw and lubricate to avoid any more problems.
Regular inspections of bifold doors are essential to identify problems before they become more serious. Regular inspections can avoid problems like misalignment, cracks and corners, which can be difficult to repair once the damage has already occurred. Conducting these checks should be part of your routine maintenance to ensure that you keep your Origin bifold doors in top condition.
No matter if your bifold doors are made of aluminium or made of composite materials, it's essential to use the right cleaning products and techniques. Begin by wiping the frame clean with a soft, all-purpose cleaning product and a soft rag. Be sure to clean away any dirt and dust and traces. Avoid using abrasive products to scrub or scour your bifold doors. This will prevent damage to the material. After cleaning your door frames, rinse them with water, then dry them. This will make your bifold doors appear great and last longer. Keep your hinges lubricated as well to minimize the chance of damage from excessive friction or stress. This is particularly crucial if you have bifold doors that have keyed locks, as they are more subject to stress than doors that do not have locks.
Loose Hinges
One of the most frequent complaints about bifold doors is that they snag when they try to close or open. This not only doesn't help in the flow of your home, it can also be a hazard. People are often caught gripping their fingers when they try to get the door to open. This can be avoided with some simple maintenance and repairs.
If your door is stuck, try loosing the set screw of the top bracket by turning it counterclockwise. This should give the door a slight pull, which will make it easier to open or close. Then tighten the set screw once more. Repeat this procedure until you are able to move the door freely.
If the anchor or pivot pin has sunk in the wood, or if it is wobbly, it could also cause the bifold door to sag. This can be fixed by taking the door out, putting it on a surface, and then loosening the top set screw in the upper left and right corner. This will allow you to remove the pivot pins or anchor pins and tighten them.
The corners of the anchor pins or pivot pins at the top and bottom could crack as time passes. This is also caused by fluctuations in temperature and other factors that affect the wood. Luckily, this is an easy and affordable solution for your bifold.
Apply a small amount (less than one teaspoon) of epoxy to the area that is cracked. Let the epoxy completely dry before opening your bifold door once more.
Other simple solutions to a sticky bifold door include applying a little grease to the track or lubricating hinges. You can also use a rubber mallet on the anchor or pivot pins in case they are not aligned with the frame or wobbly. If the screw that holds the handle on is loose, you can replace it with washers. This will stop the screw from slipping out of the hole, making the door appear like an abrasive.